Used with the Top& Bottom adjustable Jacks and the Drop Head before final levelling.

It's used to connect two Standards vertically specially in higher soffit heights.

Heavy Duty decking elements designed to allow one decking beam to sit on another at 90 degs. to each other making the Decking/ Infill layout versatile. It is available in defferent sizes.

An adjustable Jack normally used under the Drop Head for adjustments at the top made of high grade steel with rolled thread allowing adjustments to a maximum of 520mm with a tubular lock welded towards the top end to lock the Drop Head in position.

A unique design whereby both Decking & Infill can be loaded on in all four directions. The dropping mechanism allows the decking and infill along with the plywood to be removed for reuse without disturbing the support work which can be left undisturbed till the concrete is cured.

A Horizontal support element, it has 'C' pressings designed to lock on to the 'V' pressings of the Standards.

Another horizontal support element, it has 'J' pressings at two ends designed to easily lock on to the 'V' pressings of the Standards.

An Extension element normally used in the perimeter of the building specially as support to drop beams on higher floors were support legs cannot be brought from the ground level. Available in two standard sizes of 1.5m & 1.0m.

Available in two standard sizes of 1.5m& 1.0m Its and element that continues the Decking / Infill to outside the perimeter of the building for support to the Slab & Beams or as an Access platform for personnel access.

This combination also allows ease in assembling the formwork. The timber inserts in the Aluminium Wail....

Available in two standard sizes of 1.0 & 1.5 m it's used in tight situations where support to the ground is not possible / desireable.